T1000 series

Frequently asked questions

Usage

Why doesn't my refrigerator work on 12V when the car engine is not running?

On the 12 Volt mode the refrigerator needs a constantly supply of 12 Volt. That 12 Volt is coming from the car alternator when it’s running.

What do the blinking blue led and number mean on my refrigerator?

This warning code indicates that something is wrong with your refrigerator. Contact your dealer or Thetford Service Centre for further information.

Can I buy shelf clips or bins for my refrigerator?

Yes. Original Thetford spare parts are available through your dealer or Thetford Service Centre.

Which thermostat setting is the coldest?

We advise to set the refrigerator on cooling level 3, with an ambient temperature between 15°C and 25°C. A higher temperature needs a higher cooling level, a lower temperature a lower level.

Where can I find what kind of model my refrigerator is?

In the refrigerator. Behind the vegetable drawer or on the side wall there is a data plate with all the model information.

How do I move/refit the shelves?

Turn the plastic clamp of the storage shelf upwards, as illustrated in your manual. Lift that side a bit, and move the storage shelf to the desired position. First place the left side of the storage shelf without the plastic clamp in the refrigerator wall, then place the other side in the corresponding groove. Turn the plastic clamp downwards. Your storage shelf is secured again.

How can I change my refrigerator from Electric to Automatic?

 Sorry, this is not possible with these fridges

What is the T1090 Power consumption?

The T1090 refrigerator has an average use of 4 amps at 12 Volt in the day mode and 2 amps at 12 Volt in the night mode.

What are the features of the T1152 fridge? [video]

–

Please   accept marketing-cookies   to watch this video.

Cleaning and maintenance

Why isn't my refrigerator working in the automatic mode?

You may not have an automatic refrigerator, contact your dealer or Thetford Service Centre to see if this is the case.

I see an A in my display but I can not select it, what am I doing wrong?

The A is a preparation for an optional automatic refrigerator, you can’t select it.

Why isn't my refrigerator cooling?

Please check if you switched on the refrigerator according to the instructions. Check if the vehicle stands level or if there is an available energy source to start the refrigerator with. If none of this is the case, please contact your dealer or Thetford Service Centre.

What does it mean when the leds are blinking (electric version)?

The blinking leds indicates a warning code. This indicates something is not okay with your refrigerator, with attached description you are able to recognize the warning code. For further information, please contact your dealer or Thetford Service Center.

What can I do when I have ice on the fins in my refrigerator?

First make sure that the door is closed properly. Then make sure the products are cooled before putting them in the refrigerator, limit door open when using. If this does not solve your issue, please contact your dealer or Thetford Service Centre. Tips to prevent icing up.

My refrigerator smells, how can I clean it?

It is important to clean the refrigerator regularly for optimal performance. First remove the shelves, door bins, slide-out box and the drawer. Then clean those parts and the inside of the refrigerator with a soft cloth and a mild household cleaner. Also use a wet, soft cloth for the outside of the refrigerator.

Why isn't the door closing properly?

It may be that the door of your refrigerator needs to be adjusted. Contact your dealer or Thetford Service Centre to check this.

Troubleshooting

Can I replace my refrigerator?

Yes, in most instances you can replace your RV fridge. Locate your current model and find a suitable replacement with our fridge replacement chart. For further information on replacing your refrigerator, please contact your dealer or Thetford Service Centre.

Why doesn't my refrigerator always work when I use solar panels?

The 12 Volt supply could be too high due to the usage of solar panels. Your refrigerator has a built-in safety measurement for this, we advise you to check this with your dealer or Thetford Service Centre. Please check the warning code and contact you dealer or Thetford Service Centre.

The Power-LED of my fridge is flashing?

Is your refrigerator defective? The power LED flashes red and the display flashes too?
Don’t panic, the cause can be quickly identified. In the case of refrigerators with an LCD display, a wrench is shown on the right, followed by the error code, in the example this is error code “10”. The meaning of the codes can be found here.

3: Error in gas operation
> Go to a specialist workshop

4: Indicates a defective 12V heating element
> Go to a specialist workshop

6: 12V power supply is out of tolerance (11.4V-15.5V)
> Establish a sufficient, resilient power supply. If necessary, visit a specialist workshop

7: D-plus signal is missing
> Check whether the vehicle engine is running. If necessary, visit a specialist workshop

8: Indicates a defective 230V heating element
> Go to a specialist workshop

10: 230V power supply is outside the tolerance (190V-260V)
> Establish a sufficient, resilient power supply. If necessary, visit a specialist workshop

11: No usable energy can be found
> Check whether the desired type of energy is available

13: The temperature sensor is defective
> Exchange temperature sensor. Note: If the temperature sensor is defective, the refrigerator shows a fault, but continues to run in an emergency mode

Notes:

Work on live parts should always be carried out by a specialist workshop. If one type of energy cannot be used due to a fault, select an alternative type of energy

Which is the best fridge for situations where I require a high performing fridge on only 12V?

In this case, a 12V refrigerator is the best solution.

Which fridge is best suited for off grid conditions?

An absorption fridge is the best solution, because it runs on gas, 230V and 12V. 

My fridge shows fault #18.

When a fridge is first switched on the entire display will light up. This should only last for a few seconds.

What does the warning code mean on my refrigerator (automatic version) ?

It is possible that the incoming voltage is too low, which prevents the refrigerator from performing optimally. Please check if the incoming voltage is not too low on the 230V connection of the refrigerator. If this does not solve your issue, please contact your dealer or Thetford Service Centre.

Why doesn't my refrigerator work when I push the on/off button?

You may have pressed the button too shortly, we advise you to hold the button for at least 2 seconds. If this does not solve your issue, please contact your dealer or Thetford Service Centre.