All-Surface Care

Frequently Asked Questions

Cleaning and maintenance

How does Protect All® All-Surface Care reduce waste?

All-Surface Care works on so many surfaces that it eliminates the need to buy five to ten different products for your vehicles. This translates into fewer containers thrown into landfills. Protect All® All-Surface Care does it all to the last drop … there’s nothing left to waste.

How much detailing is necessary?

Most waxes dry to a haze and require buffing and detailing cracks with a brush. Protect All® All-Surface Care dries clear requiring less detailing and fewer man hours. Hazing only occurs when too much product has been applied.

What is a UV Blocker?

The ultra-violet rays of the sun cause damage and deterioration to most surfaces. Used regularly, the UV Blocker in Protect All® All-Surface Care aids in preventing deterioration.

What makes All-surface care better than similar products on the market?

There are many good products on the market for specific surfaces. Protect All® All-Surface Care is formulated to work on all surfaces, replacing five to ten different products. A 16-ounce bottle of All-Surface Care will polish, wax, and treat car surfaces seven to eight times. All-Surface Care is extremely cost effective.

How long does Protect All® All-Surface Care last? How often should I use it?

An application will last up to six months depending on climatic conditions and exposure to the sun. However, you may use All-Surface Care as often as you like with no excessive build-up. Use it regularly to keep maintenance to a minimum. It’s easy, quick, and you are polishing and waxing every time you clean. All-Surface Care works best at temperatures between 60 and 90 degrees Fahrenheit. Keep All-Surface Care from freezing.

Will Protect All® All-Surface Care smear or streak on glass and mirrors?

NO! If streaking occurs you have used too much, or did not wipe completely dry. Mirrors and glass sparkle. Water rolls off as you travel. Bugs and dust wipe off quickly and easily, too.

Should I remove old wax?

Only if you have a build-up that is turning yellow or chalky. There is no need to remove wax from a surface in presentable condition. If you have a great shine already, an application of Protect All® All-Surface Care will enhance the surface making future cleaning and polishing easier and quicker.

Can I use Protect All® All-Surface Care on tires, rubber trim, vinyl and plastic?

All-Surface Care works on rubber, vinyl, and plastic surfaces, including tires. A spray and wipe treatment of the product gives a clean, non-oily natural appearance that’s water repellent and anti-static, attracting less dust and dirt. With regular applications, All-Surface Care aids in preventing deterioration.

Will Protect All® All-Surface Care remove stains, water spots, oxidation, etc.?

Protect All® All-Surface Care is a non-abrasive, moderate cleaner. It can be used effectively on any surface without scratching. It will not remove hard oxidation, black streaks and other heavy grime the first time. For these conditions we suggest a one time application of a strong cleaner or polishing compound to prepare the surface such as Protect All’s Fiberglass Oxidation Remover and Color Restorer; then treat the surface with All-Surface Care. It’s all you will need for future cleaning, waxing, polishing and treating. Dirt, bugs, streaks, water spots, algae, and barnacles will clean off with less effort .

Fiberglass Oxidation Remover

Where not to use Protect All® All-Surface Care?

For personal safety — to avoid slipping and falling — DO NOT get the slightest overspray on any walking surface. If necessary remove excess All-Surface Care with a solvent such as mineral spirits.

Where can I use Protect All® All-Surface Care?

All-Surface Care can be used on any surface, cars, boats, RVs, airplanes, motorcycles, and more. Protect All® All-Surface Care works on fiberglass, aluminum, chrome, stainless steel, paint, vinyl, rubber, Plexiglas®, plastic, Formica®, wood, and glass. Yes, especially glass.